CSIS 330 Quiz 6

CSIS 330 Quiz 6 Liberty University

Set 1

  1. The double colon can only be used once within an IPv6 address.
  2. The default subnet mask for a Class B address is _____________.
  3. What is the result of the binary number 11111111 ANDed with 00101010?
  4. The source address of any packet is always the unicast address of the originating host.
  5. Which of the following is not a type of broadcast address?
  6. Which type of communication is occurring when a packet is sent from one host to all hosts in the network?
  7. Which of the following IPv6 address types is used by a host to send a packet to itself and cannot be assigned to a physical interface?
  8. The legacy Class C address block was designed to support small networks with a maximum of 254 host addresses and used a ___________ prefix.
  9. The default subnet mask for a Class A address is _____________.
  10. form the boundary for a broadcast domain.
  11. Which part of the structure of a global unicast address is equivalent to the host portion of an IPv4 address?
  12. The ping command for IPv6 is identical to the command used with IPv4, except that an IPv6 address is used.
  13. The legacy Class A address block was designed to support extremely large networks with more than 16 million host addresses and used a ___________ prefix.
  14. Which of the following IPv6 address types are used to communicate with other devices on the same local link or subnet?
  15. Within the IPv4 address range of a network, the first address is reserved for the ___________ address.
  16. What two parts make up an Ethernet MAC address?
  17. IPv4 addresses are represented using _______________ format where each byte (octet) is a decimal number in the range of 0 to 255.
  18. Routers will not forward packets with a link-local source or destination address.
  19. Unlike IPv4, in IPv6, the all-0s address can be assigned to a device. However, the all-0s address is reserved as a Subnet-Router anycast address and should be assigned only to routers.
  20. Which of the following is true of a network address?
  21. If two hosts have the same bit pattern in the specified network portion of the 32-bit address, those two hosts reside in different networks.
  22. Which IPv4 block of addresses is reserved for future use and is currently being used for research and experimentation purposes?
  23. Historically, IPv4 unicast addresses were grouped into specific sizes called class A, class B, and class C addresses. This is called Classful Addressing.
  24. An IPv6 _______________ address is similar to a public IPv4 address in that it is unique, Internet routable, and can be configured statically or assigned dynamically.
  25. When a host sends a packet, the network portion of the addresses of the source and destination IPv4 addresses are determined based on a logical ____ of the subnet mask with each of these addresses.

Set 2

  1. Which option contained in a Router Advertisement (RA) message indicates that the device should use the prefix, prefix length, and default gateway address information contained in the RA message. No other information is available from a DHCPv6 server.
  2. The 1s in the subnet mask represent the ___________ portion, and the 0s represent the ______ portion.
  3. Which of the following techniques requires an IPv6 packet to be encapsulated in an IPv4 to transport an IPv6 packet over an IPv4 network?
  4. Every IPv6 enabled device is required to have a link-local address.
  5. Which of the following is not a part of the structure of a global unicast address?
  6. Which part of the structure of a global unicast address is equivalent to the network portion of an IPv4 address?
  7. Which of the following is true of a network address?
  8. Which of the following is not a type of IPv6 address?
  9. Which IPv4 block of addresses is reserved for link-local addresses?
  10. Which of the following is not a category of migration techniques intended to facilitate the change from IPv4 to IPv6?
  11. What is the result of the binary number 00000000 ANDed with 00101010?
  12. Historically, IPv4 unicast addresses were grouped into specific sizes called class A, class B, and class C addresses.  This is called Classful Addressing.
  13. __________________ is a method that allows a device to obtain its prefix, prefix length, and default gateway address information from an IPv6 router without the use of a DHCPv6 server.
  14. Which IPv6 addresses are equivalent to public IPv4 addresses in that they are globally unique and routable on the Internet?
  15. A 0 ANDed with a 1 will always yield a value of ____.
  16. What symbol is used to replace any single, contiguous string of one or more 16-bit hextets consisting of all 0s?
  17. The ping command for IPv6 is identical to the command used with IPv4, except that an IPv6 address is used.
  18. Unlike IPv4, in IPv6, the all-0s address can be assigned to a device.  However, the all-0s address is reserved as a Subnet-Router anycast address and should be assigned only to routers.
  19. When a device is assigned a global unicast or link-local unicast address, it is recommended that ________________is performed on the address to ensure that it is unique.
  20. The depletion of IPv4 address space has been the motivating factor for moving to IPv6.
  21. A(n) ________________ IPv6 address is an all-0s address represented as ::/128, or just :: in the compressed format.
  22. Which IPv6 addresses are in the range of FC00::/7 to FDFF::/7?
  23. What type of IPv6 addresses are in the range FE80::/10?
  24. The address block for legacy Class B networks included the range
  25. What is the purpose of the network address?
$2.99
Add to Cart

has been added to your cart!

have been added to your cart!