CSIS 330 Quiz 7

CSIS 330 Quiz 7 Liberty University

Set 1

  1. IPv4 subnets are created by using one or more of the ____________ bits as ____________ bits.
  2. You are given an IPv4 network address of 192.168.10.0/24 by your ISP. You need to subnet this network. You know that you need at least 6 subnets. How many hosts per subnet will be possible in the new design?
  3. How many usable hosts per sub-network will you have using a /17 address?
  4. What is the first step in planning network subnets?
  5. You have an interface on a router with the IP address of 192.168.192.10 /29. What is the broadcast address the hosts will use on this LAN?
  6. Any network resource, such as a server or a printer, should always have a dynamic IP address.
  7. A network technician borrows 5 bits from the 10.0.0.0/16 network to create subnets. What is the subnet mask that should be associated with each of the newly created subnets?
  8. Using an IPv4 network address of 192.168.2.0/26, what is the subnetwork address in the second subnet (i.e. subnet[1])?
  9. The IP address 198.20.135.24 /28 is a network address.
  10. Within a network, there are two addresses that cannot be assigned to devices. These addresses are the
  11. Using an IPv4 network address of 192.168.2.0/26, how many bits have been borrowed?
  12. How many subnets can be created if 4 bits are borrowed to specify subnets?
  13. Using an IPv4 network address of 192.168.2.0/26, what is the subnet mask?
  14. In creating subnets for IPv6, conversion to binary is not required.
  15. Which of the following needs are addressed in performing a network requirement study to plan subnets?
  16. Which of the following is not a primary consideration when planning address allocation?
  17. Which of the following subnet masks is used to represent a prefix mask of / 26
  18. The IP address 10.0.0.1 /24 is a network address.
  19. All devices attached to the same network will have an IPv4 host address for that network and a common
  20. Traffic cannot be forwarded between subnets without the use of a router.
  21. You are given an IPv4 network address of 192.168.10.0/24 by your ISP. You need to subnet this network. You know that the subnet mask will be 255.255.255.252. What is the broadcast address of the first subnet (i.e. subnet[0])?
  22. Using an IPv4 network address of 192.168.2.0/26, what is the last usable host address in the second subnet (i.e. subnet[1])?
  23. You have been assigned an IP address for your network of 192.168.1.0 / 24. Each subnet needs to accommodate 12 hosts. How many bits do you need to borrow to create your subnets?
  24. A ____________________ is necessary for devices on different networks to communicate.
  25. Which one of the following is a private IP address?

Set 2

  1. Traffic cannot be forwarded between subnets without the use of a router.
  2. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network.  You know that the subnet mask will be 255.255.255.252. Therefore, what is the new slash prefix of the network address?
  3. You need to subnet a network that has 5 subnets, each with at least 16 hosts.  Which subnet mask would you use?
  4. The IP address 198.10.132.67 /26 is a network address.
  5. A new department has been established with 511 hosts that require addresses.  Currently, the company uses the 10.20.0.0/16 address space.  How many bits must the network administrator borrow to provide addresses for this subnet without wasting addresses?
  6. In subnetting, borrowing bits from the host portion of the address results in more host addresses that can be assigned but fewer subnets that can be defined.
  7. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network. You know that you need at least 6 subnets.   How many hosts per subnet will be possible in the new design?
  8. To determine whether traffic on a network is local or remote, a router uses a ______________________.
  9. Within a network, there are two addresses that cannot be assigned to devices.  These addresses are  the __________________.
  10. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network. You know that you need at least 6 subnets.  What will be the address of your first usable host in your first subnet (i.e. subnet[0])?
  11. Which of the following subnet masks is used to represent a prefix mask of / 26
  12. Using an IPv4 network address of 192.168.2.0/26, what is the last usable host address in the second subnet (i.e. subnet[1])?
  13. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network.  You know that the subnet mask will be 255.255.255.252. What is the last usable host address of the first subnet (i.e. subnet[0])?
  14. What is the first step in planning network subnets?
  15. In creating subnets for IPv6, conversion to binary is not required.
  16. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network. You know that you need at least 6 subnets.  How many bits will you need to borrow to achieve this?
  17. How many hosts per network can you have with a subnet mask of 255.255.192.0?
  18. You have an interface on a router with the IP address of 192.168.192.10 /29.  What is the broadcast address the hosts will use on this LAN?
  19. How many valid host addresses are created when 4 host bits are borrowed from the 10.20.20.0/24 network?
  20. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network.  You know that the subnet mask will be 255.255.255.252. What is the broadcast address of the first subnet (i.e. subnet[0])?
  21. What is the maximum number of IP addresses that can be assigned to hosts on a local subnet that uses the 255.255.255.224 subnet mask?
  22. How many usable hosts per sub-network will you have using a /17 address?
  23. Which one of the following is a private IP address?
  24. You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network. You know that you need at least 6 subnets.  What will be the subnet mask in the new design?
  25. A ____________________ is necessary for devices on different networks to communicate.
$2.99
Buy Answer Key
  • Find by class